Maintenance

After a while, the drive belt on your kBox may need a trim or replacement. Here’s how to fix it.

Check Regularly

The drive belt and its attachment to the shaft is the most sensitive part of the kBox. Be attentive and check regularly for signs of wear and tear.

Trimming the Belt

If damage occurs close to the end of the belt, you need to trim the belt by cutting off the damaged end and reattach the new end. Read the trimming guide for kBox4 or kBox3.

If trimming the damaged parts of the belt leaves a remaining belt that is too short, the belt needs to be replaced. Read guide.

REPLACING THE BELT

If trimming the damaged parts of the belt leaves a remaining belt that is too short, the belt needs to be replaced. Read the replacement guide for kBox4 or kBox3.

TIGHTENING SCREWS AND NUTS

Most kBox’es are put under a lot of force and some vibrations, and on the kBox4 we recommend that screws and nuts are checked and tightened regularly, at least once a month. Watch the video guide for kBox4.

 

Contact us or your reseller for help, or go back to support.

News blog

Latest news