Maintenance. For Peak Performance.
To keep your equipment in the best condition possible, you will need to carry out a few maintenance tasks. Here’s a quick and simple overview of what this entails.
*For the latest kPulley Go, LegExx and LegFlexx maintenance tips checkout the PDF manuals in our Online Academy
Check Regularly
The drive belt and its attachment to the shaft is the most sensitive part of the kBox, kPulley and LegExx. Be attentive and check regularly for signs of wear and tear.
Trim the Belt
If damage occurs close to the end of the belt, you need to trim the belt by cutting off the damaged end and reattach the new end. For more information about this process in our latest product line click here.
Otherwise click here to read our guide for the kBox3.
Replace the Belt
If trimming the damaged parts of the belt leaves a remaining belt that is too short, the belt needs to be replaced. For more information about this process in our latest product line click here.
Otherwise click here to read our guide for the kBox3.
Tighten Screws and Nuts
Most kBox devices are put under a lot of force and some vibrations, so we recommend that screws and nuts are checked and tightened regularly, at least once every 1-3 months.
kMeter Maintenance
Contact us or your reseller for any further help.
