Maintenance: Replace the Belt on kBox4

When the drive belt on your kBox4 is damaged and cannot be trimmed, it needs to be replaced. Here's how to fix it.

If trimming the damaged parts of the belt leaves a remaining belt that is too short, the belt needs to be replaced. Follow this procedure for the kBox4:

 

Procedure: kBox4 PRO

  • Verify that you have a replacement belt, or contact us to order.
  • Remove the Belt from the shaft, flip kBox4 over, take out from the Belt Lock and unwind all the Belt from the take-up spool.
  • Detach the Belt from the take-up spool by disconnecting at the hook between the long and the short strand close to the spring. Make sure the short strand is fixated so the spring doesn’t unwind and loose its tension [can damage the spring].
  • Attach new Drive Belt to the short strand at the hook.
  • Reassemble the Belt all the way back to the shaft in the reverse order from when you removed it. Attach the Belt to shaft after you are certain that the Pulley is connected and the Belt isn’t twisted.

PROCEDURE: kBox4 Lite

  • Verify that you have a replacement belt, or contact us to order.
  • Remove the Belt from the shaft, push Belt Lock Button and pull out all of the Belt.
  • Put the new Belt through the Belt Lock, attach the Pulley and attach to the shaft. Make sure the Belt isn’t twisted.

Video

 

 

Contact us or your reseller for help, or go back to maintenance.